Prof. Dr. Mohamed Abdel Azim, Dean of the Faculty, congratulates his distinguished students who won the Triple S sports competition at Helwan University for winning four out of nine places at the Republic level.
The Minister of Youth and Sports, Dr. Ashraf Sobhy, attended the honor ceremony.

Winning results are as follows:
🔘 Egg Device Protection Contest

First Place : Impact
Second Place : Ninja Wariors
Third place : Abachy
Fourth and Fifth place, but they were not honored.

🔘 Truss Spaghetti Competition

Second Place: Passion Makers

The Dean of the Faculty affirmed his full support for all sports teams and activities, wishing success, harvesting more prizes and achieving sportsmanship among all participating sports teams from all universities.

New challenges from the iti who is ready? 💪

The first challenge is the Furniture Design & Visualization course.

The second challenge is the Architectural Visualization course.

Challenges within the intensive training program (3 months).

The rules:

1- Be a university graduate from 2012 to 2021.

2- The duration of the study is about 4 months. It is an intensive daily study. It is necessary to complete a full-time study, which means forget your friends and your outgoings.

3- The architectural visualization course is available only for graduates of colleges (Engineering - Fine Arts (Architecture or Interior Design (Decor)) - Applied Arts (Architecture or Interior Design (Decoration)) - Urban Planning)

4- The furniture design course is available to graduates of all Egyptian colleges, provided that they have a technical background in architectural design, interior design, furniture industry or 3D modeling.

5- In order to graduate, you must finish your graduation project and obtain a certificate in your field of specialization.

6- You also have to do a freelancing job for a real client in order to graduate from the scholarship.

When the challenge is successfully completed:

The Architectural Visualization course allows you to work in the following positions:

Architecture visualizer

Architecture Exterior designer

Architecture Interior designer

The Furniture Design course allows you to work in the following positions:

Furniture Designer

Furniture Visualizer

Required documents and registration stages are indicated on the registration website.

- The system for attending training courses is a blended learning system (part at the institute’s headquarters in the Smart Village and part online).

Registration is open and continues until Wednesday, March 2, 2022

Registration is done through the official website of the Institute of Information Technology

The Faculty Council No. (565) was held on Monday, February 21, 2022 at exactly twelve thirty in the afternoon in the hall of Prof. Dr. / Al-Saeed Ashour, with the application of precautionary reserves. The Council was chaired by Prof. Dr. / Mohamed Abdel Azim, Dean of the Faculty and in the presence of vice-deans of the faculty, heads of departments, heads of specific programs and representatives of some external community entities.
The session was opened by Prof. Dr. Mohamed Abdel Azim, Dean of the Faculty, where:
His Excellency welcomed the present,
offered words of condolences on the death of both Eng. Ahmed Adel Al-Hadidi, son of Prof. Dr. Adel Al-Hadidi, professor in the Department of Spinning and Weaving Engineering, and the father of Mrs. Mai Gamal in the Mechatronics Program.
His Excellency offered words of appreciation and gratitude while honoring two of the faculty’s symbols and former deans, namely: Prof. Dr. Ibrahim Jar Al Alam, and Prof. Dr. Adel Dhaif, praising their efforts towards the faculty during their tenure as Dean of the Faculty. They were also awarded the Faculty Shield and a certificate of appreciation.
His Excellency praised the activation of the textile unit, he also thanked its teamwork for their efforts. He mentioned that the Faculty of Engineering, Mansoura University is one of two faculties among Egyptian universities that enjoys the presence of the Department of Spinning and Weaving Engineering, therefore, he found that it is necessary for the faculty to contribute to the wheel of the state’s economic growth as the Faculty of Engineering, used to be an effective cog in the development of the wheel of the state’s economy. This has been done after the directions of the state, headed by President Abdel-Fattah El-Sisi, in the restoration of the spinning and weaving industry with the state currently establishing the largest, and greatest factory with advanced capabilities in the Middle East in the field of spinning and weaving industry located in the city of Al-Rubiki, which is scheduled to be completed in August 2022. The Faculty of Engineering, must not stand watching what is happening or wait for the invitation to participate in the work and production, but it must volunteer to work forward and positively participate in this field because of the scientific experience we have represented in great professors, the readiness of laboratories and students who are trained in the field as an integral part of the academic study. This is what we have already done, and therefore I must thank Professor Dr. Hamdan Abu Taleb, professor of spinning and textiles industry in the faculty and his teamwork involved in reviving the textile unit namely: Eng. Ahmed Samir, Eng. Muhammad Khudair, and Eng. Elham El-Imam, specialists from Misr Spinning and Weaving Company in Mahalla El-Kubra.
Then His Excellency honored the Textile Industry Revival Unit team by presenting the college shield to them.
His Excellency congratulated the promotion of faculty members : Assistant Prof. Heba Mohamed, Department of Architecture, Assistant Prof. Sarah Al Bahloul, Department of Production and Mechanical Design Engineering and Assistant Prof. Dr. Fawzy Hamed, Department of Production and Mechanical Design Engineering.
His Excellency briefed the attendees about the student competitions that were won by the faculty as well as the student projects that are being carried out.
His Excellency praised the quality and academic accreditation.
His Excellency took note of the equipment that has been completed for most of the faculty laboratories.
His Excellency commended the effort made by all the technicians and craftsmen in the faculty and the extent to which they provided the faculty with large funds that the faculty had paid to others in previous periods to carry out such works.
His Excellency briefed on the cooperation protocol between the Faculty and the University of Louisville in the United States of America.
His Excellency briefed on the cooperation protocol between the Faculty and the Iraqi University of Tal Afar.
His Excellency urged announcing the results of students on their specified dates, as well as announcing the study schedules.
His Excellency praised the course on the basics of robotics for children and thanked the course work team.
Then, His Excellency moved to discuss the topics on the agenda to take decisions on them with the distinguished members of the Faculty Council.

Prof. Dr. Mohamed Abdel Azim, Dean of the Faculty, congratulates the faculty’s basketball team for winning the first place in the Faculty of Engineering’s Forum.
Wishing them success snd excellence.

The Faculty of Engineering witnessed the activities of the closing ceremony honoring the children enrolled in the training course “ Fundamentals of Electronics and Robotics” on 25,2,2022. The course lasted for seven days, and took place under the auspices of Prof. Dr. Mohamed Abdel Azim, Dean of the Faculty and the supervision of Dr. Abeer Tawakkul, Assistant Professor at the Department of Electronics and Communications.

The course is a successful idea in a series of other successful ideas initiated and implemented by Dr. Abeer, starting with organizing a radio science conference, passing through the organization of Huawei Academy competitions.

The Basics of Technology Course for children is one of the distinguished works of the Faculty of Engineering, because such courses have not previously been implemented, through which a smile was drawn on the faces of children and their families, the main aim of the course is to provide children with distinguished education, give hope to children for a better tomorrow and to achieve a brilliant future.

Prof. Dr. Abdel Azeem then, granted certificates of honor to the children, and took photos with them.

His Excellency also gave words of thanks and appreciation to the training team for their outstanding effort, they were given certificates of appreciation. The activities has ended, but its impact remains in the soul and in the conscience of the audience, engraved in the memory of our children.

An unprecedented work that was initiated by Dr. Abeer Tawakkol, assistant professor in the Department of Electronics and Communications, Faculty of Engineering, a work which is not only great in the depth of its goal, but also in what to reap from it in the long run. The main aim of the course is the investment of the human element represented in our children, the mainstay of the future. This was achieved by providing a training course for children aged 6 to 16 years old in the work space hall located at the faculty. The training course was implemented in the form of a workshop to introduce children to the simple tools of the basics of robotics, modern technology, and to give them the experience of dismantling, installing and connecting some tools with their own hands, to create a confident generation that loves innovation.

In the activities of the fifth day of the course, the material was presented and followed up by:

Eng. Ahmed Ramadan

Eng. Shorouq Muhammad

Eng. Muhammad Ghazi

Eng. Inas Ayman

Eng. Sarah Atef

Eng. Jalal Al-Baili

Eng. Omar Al-Sharqawi

Eng. Marwan Amr

Mr. Islam Hamdy

To watch children'svideos:

• Video 1
• Video 2
• Video 3
• Video 4

Prof. Dr. Mohamed Abdel Azim , Dean of the Faculty congratulated two members of the Faculty Students’ Union for winning in the elections of the University Parliament as committee chairperson and committee agent.

• Chairman of the Youth and Sports Committee:
  Student: Ali Ismail Mohamed
• Agent of the Religious Affairs and Endowments Committee:
  Student: Alaa Ibrahim Joma

His excellency urged the winners to perform their role effectively, and that they must do their best to help their faculty, colleagues and university.

Find out all about the International Telecommunication Conference

   https://itc-egypt-adc.org 

   The International Telecommunications Conference (ITC-Egypt’2022)

Prof. Dr. Mohamed Abdel Azim, Dean of the Faculty attended the activities of the fourth day. Prof. Abdel Azim added a lot of important information through discussion with both the teamwork and children. This represents the keenness of his sovereignty for this social event.
Dr. Abeer Tawakkol, assistant professor at the faculty of engineering, presented the idea of the course, which has a great fruitful impact on the children. The activities took place in the children's training hall and in the presence of Dr. Sahar Sedky, Vice Dean of the Faculty for the Environment, the teamwork:

Eng. Shorouk Mohammed
Eng. Omar Al-Sharqawi
Eng. Jalal Al-Baili
Eng. Muhammad Ghazi
Eng. Inas Ayman
Eng. Sarah Atef
Eng. Muhammad Shaheen 

Eng. Ahmed Ramadan
Mr. Islam Hamdi, and a number of faculty members.
Dr Abeer and her teamwork exert great efforts to create a joyful family spirit that stimulates the love of science and implements a positive image in the conscience and memory of children about the highness and greatness of educational institutions such as the Faculty of Engineering, so that the formation of their personality is informed by luminous models that greatly affect their personality in the future.

Congratulations to the Faculty of Engineering, Mansoura University, on the accreditation of :-

1. The Department of Mechanical Power Engineering
2. The Mechatronics Engineering Program

from the Board of Directors of the National Authority for Accreditation and Quality Assurance of Education.

Sincere efforts, distinguished works and great achievements always reap their fruits on time. Indeed, taking a leadership position comes on merit, not through grants, and this is what the Faculty of Engineering was able to achieve in its last era.

Prof. Dr. Mohamed Abdel Azim, Dean of the Faculty, held an educational symposium entitled “Future Jobs and the Conflict between Automation and Manualation”, on 22,2,2022, in Prof. Rashad Al-Badrawy’s Hall at eleven o’clock in the morning, where he clarified a number of themes, the most important of which are:
1. Most traditional jobs that exist now will be extinct in the future.
2. The necessity of transforming the nature of job performance in the future according to the use of the latest technological innovations.
3. How to prepare an individual able to perform the job of the future.
4. Clarifying the preference among the results achieved as a consequence of the application of automation over the manualation.
5. Learning about the most important future jobs, required disciplines, and how to be prepared and armed by gaining and developing various skills.

It is worth noting that the Dean of the Faculty held this important symposium in the light of the sustainable development plan in accordance with Egypt's 2030 vision aiming to complete and achieve the aspirations of the Egyptian state. The Faculty of Engineering, Mansoura University, as everyone is accustomed to it, and as it has always taken upon itself to be an effective, strong, positive cog supporting the wheel of economic development in the Egyptian state.

Under the auspices of Prof. Dr. Mohamed Abdel Azim, Dean of the Faculty of Engineering and the supervision of Dr. Abeer Tawakkol, Assistant Professor at the Faculty of Engineering, activities of the third day were presented and monitored by Eng. Shorouk Muhammad, and her follow-up team:
Eng. Mohamed Ahmed
Eng. Sarah Atef
Eng. Inas Ayman
Eng. Omar Al-Sharqawi
Eng. Galal Abdel Hady
Eng. Ahmed Ramadan
Mr. Islam Hamdy

Third day activities of the training course for technology and robotics, were marked by the acceptance and joy of the children, they were also infused with the desired benefit from the faculty administration towards them, in order to create a generation that masters skills and possesses imagination and limitless thought that gives it opportunities for innovation and invention.
Such beautiful and useful works represent the important and necessary soft power to integrate with the great achievements witnessed by the Faculty of Engineering.